Environmentally friendly color glass sheets with a water based coating system.
Pintura™ is the first color sheet glass products in the market with water based coating system. It is also one of the few no-VOC glass coatings available and therefore it has zero environmental impact from the manufacturing of the paint to the application and disposal of any paint waste.
Pintura™ is extremely durable colors are applied by spray coating in multiple layers, providing the smoothest and most consistent colors even for small runs, and because Pintura™ is cured in controlled conditions, the finish is permanently bonded to the surface, guaranteeing that when fabricated it will not peel, chip or otherwise separate from the surface.
Pintura™ is available in standard colors as shown below, or contact us for custom colors.
The Pintura™ colors shown on this web page are digitally simulated. For more accurate color representation please contact the Pulp Studio salesperson for your area and request physical samples.
Pintura™ Perla is a new addition to Pulp Studio's industry pioneering Pintura™ series. In addition to its environmentally friendly water-based color, Perla is coated with a reflective element which produces lustrous and subtle mirror quality.
Pintura™ Perla is suitable for both residential and commercial use, as direct application to wall, or in back-to-back laminated version for glass partitioning.
Like Pintura™, Perla is also available in both standard colors, as shown on the right, or custom colors.
The Pintura™ Perla colors shown on this web page are digitally simulated. For more accurate color representation please contact the Pulp Studio salesperson for your area and request physical samples.
Stick it. Write on it.
Now the glass interior becomes
part of your creativity.
Pulp Studio's environmentally friendly Pintura™ series is now expanded with the addition of the Pintura™ MagBoard panel that not only enhances your interior with rich selection of colors but also adds the functionality of marker and magnetic boards right on your wall.
Pintura™ MagBoard allows you to stick memos, documents, and presentation materials with magnets on a writeable surface utilizing dry erase pens.
Pintura™ MagBoard is suitable for residential and business use as a direct application to wall, back-to-back laminated version for glass partitioning, and with wall attachments.
Pintura™ MagBoard is available in standard colors and custom colors. Please contact the Pulp Studio salesperson for assistance.
*Markers with water-based ink, not permanent markers, are required for carefree maintenance.
We now offer in stock our aluminum marker board pen trays. They are available in 12' lengths and can be purchased in full lengths or cut to size. We can also provide you complete installation instructions with two options for installation.
Rare earth magnets are the only magnets that will work on glass marker boards. Our rare earth magnets are assembled with a handle for easier use and safety as rare earth magnets are very strong and can actually cause injuries when used on their own.
Pintura™ EG (Environmental Graphics) brings the simplicity of integrating our back coated glass with permanent signage.
We have the ability to use our Pintura base product and integrate your signage elements through the back surface of the glass. This way the signage is protected and not applied to the face of the material where it can be damaged.
We use a very high resolution system that can provide us with unlimited details in your signage requirements and then the glass is applied to the wall as any of our other glass coated products. Your signage now becomes part of your glass package and you will recognize the savings immediately.
Next time you are thinking about those Evacuation Maps in the elevator lobbies, think about Pintura™ EG.
Many projects require a colored back coated glass that also complies with the requirements of Category II safety standards, such as in elevator cabs.
That is where PINCAB comes in. It starts by using a piece of our PINTURA glass which is then laminated to another piece of glass with the color applied in the inside surface of the lamination, thus leaving the back surface of glass smooth and available for gluing to another substrate for maximum adhesion.
PINCAB can also be used in ceiling systems, wall panels, door inserts or any place where there is a need for solid opaque color with compliance of the Category II safety standard (CPSC 16CFR 1201).
LGT™ — Light Glass Technology
Introducing Pintura AR,
glass surface perfect for projection
First there was the glass marker board, then there was the magnetic glass marker board and now there is PINTURA-AR, a non-reflective anti-scratch marker board that allows you to also project images on it with enhanced color saturation and image definition not found in the standard glass marker board.
Pintura-AR gives you all of your solutions in one product and is available in sizes capable of covering your entire wall. Integrate it with magnetic capability, corporate logos and we can even put in a fully framed system for you.
It's new anti-scratch surface will keep it looking good, and the surface cleans up easily from the use of the proper dry-erase pens. The glass is available in both annealed and fully tempered in any color, although white seems to be the color of choice.View Marker Tray and Magnets
This image represent an actual photograph of a test
installation. It has not been created or altered in any
way using any digital software.